Cov txiaj ntsig tseem ceeb ntawm Wanda Hom Nqus Tsev Cib Extruder

1. Txheej txheem Innovation Advantages

   • Nqus Degassing: Ua tiav tshem tawm cov huab cua los ntawm cov khoom siv raw, tshem tawm elastic rebound teebmeem thaum extrusion thiab tiv thaiv kev tawg.

   • Kev kub siab Extrusion: Extrusion siab tuaj yeem ncav cuag 2.5-4.0 MPa (cov cuab yeej siv niaj hnub: 1.5-2.5 MPa), txhim kho qhov ntom ntom ntawm lub cev ntsuab.

2. Khoom Zoo Txhim Kho

   • Dimensional raug: Kev ua yuam kev tuaj yeem tswj tau hauv ± 1 hli, txo cov mortar siv hauv masonry.

   • Nto Zoo: Smoothness nce mus txog Ra ≤ 6.3μm, ua kom siv ncaj qha rau cov phab ntsa ua vaj tse.

3. Cov txiaj ntsig tseem ceeb ntawm kev lag luam

   • Txo tus nqi tsis raug: Nrog rau kev tsim txhua xyoo ntawm 60 lab tus qauv cib, kwv yees li 900,000 tsawg dua cov cib uas raug tsim tawm txhua xyoo, txuag ntau dua 200,000 yuan hauv cov nqi.

   • Extended Pwm Lub Neej: Txhim kho cov khoom ntws txo pwm coj los ntawm 30% -40%.

4. Environmental contribution

   • Noise Reduction Design: Cov qauv kaw kom txo cov suab nrov ntawm 90 dB(A) mus rau qis dua 75 dB(A).

   • Dust Control: Nruab nrog lub tshuab lubrication tsis siv neeg, txo qhov kev pheej hmoo ntawm kev saib xyuas kab noj hniav thiab txo qis rhiav plua plav concentration.

Kev cuam tshuam ntawm Wanda Hom Nqus Extruder ntawm Sintered Cib

1. Txhim kho lub cev zoo

   • Nce ntom ntom: Thaum lub tshuab nqus tsev kawm ntawv nce mus txog -0.08 txog -0.095 MPa, huab cua qhov hauv lub cev ntsuab txo los ntawm 15% -30%, thiab lub zog compressive tom qab tua hluav taws nce 10% -25%.

   • Txo qhov tsis xws luag: Internal npuas ua rau delamination thiab tawg yog tshem tawm, nrog rau cov khoom tiav lawm nce los ntawm 85% mus rau ntau tshaj 95%.

2. Txhim kho txheej txheem Adaptability

   • Raw Khoom Tolerance: Muaj peev xwm tuav cov av nplaum-plasticity los yog cov khoom siv yas qis qis, nrog cov ntsiab lus noo noo nthuav dav mus rau 18% -22%.

   • Complex Cross-Section Moulding: Qhov tus nqi ntawm hollow cib tuaj yeem nce mus rau 40% -50%, thiab cov duab lub qhov zoo sib xws.

3. Kev siv hluav taws xob thiab kev hloov pauv tau zoo

   • Shortened ziab voj voog: Thawj cov ntsiab lus noo noo ntawm cov cib yog sib xws, txo lub sij hawm ziab los ntawm 20% -30%, yog li txo cov roj noj.

   • Ntxiv Extrusion Fais Fab Kev Siv: Lub tshuab nqus tsev ntxiv txog 15% kev siv hluav taws xob ntau dua, tab sis tag nrho cov khoom lag luam tawm los txhim kho offsets cov nqi ntxiv.

Cov ntsiab lus

Daim ntawv thov ntawm lub tshuab nqus tsev extruder cim qhov kev hloov pauv ntawm sintered cib ntau lawm los ntawm kev tsim khoom dav rau kev tsim khoom. Nws tsis tsuas yog txhim kho cov khoom ua tau zoo tab sis kuj tseem txhawb kev lag luam mus rau ib puag ncig tus phooj ywg, tsis muaj kuab paug, thiab muaj txiaj ntsig zoo ntxiv. Nws yog tshwj xeeb tshaj yog haum rau zus tau tej cov high-end khoom xws li zoo zoo nkauj cib, exposed phab ntsa cib, thiab lub zog-txuag bricks nrog lub siab tus nqi.